Stainless Steel – Page 2 – Conko Metal Technology

20 entries Ask about a specific tool

The general-purpose workhorse. Four flutes, a 38° helix and an AlCrN coating that holds up in dry and minimum-lubrication machining of steel.

The standard double-cut burr for deburring, weld dressing and stock removal on steel and stainless.

A ball burr for radii, blending and internal contours where a cylinder cannot follow the shape.

Tree shape with a radiused end for slotting and opening out holes without a sharp corner digging in.

Ten shapes in a single case: the burr you need without ordering the burr you need.

Send a drawing or a sample. We grind the profile, the coating and the marking you specify — and quote within 24 hours.

A profile ground into the flute form: one pass where a standard tool would need three operations.

Two or more diameters on one body, held concentric so the step lands where the drawing says it does.

Several profiles on one body: the answer when a family of parts shares a common set of shapes.

Geometry developed for titanium and superalloys: controlled rake, reinforced edges and clearance that keeps heat out of the cut.

Can't find the geometry you need?

Most of what we ship is ground to a drawing. Send yours — we quote within 24 hours.