Solid Carbide Drill 3×D — Standard
The everyday carbide drill for holes up to three diameters deep. Faster than HSS, and it holds size.
Ø1–20 mm · 2 (140° point) · TiAlN
Solid carbide cutting tools
Eight product families covering milling, drilling, reaming and deburring — with custom geometry ground to your drawing.
2-Flute Ball Nose End Mill — Long Reach
A long, slender ball nose for deep cavities and radii that sit well below the surface line, with a tapered…
Ø1–12 mm (R0.5–6) · 2 · AlCrN
2-Flute Ball Nose End Mill — Standard
The standard-length ball nose: the everyday tool for 3D surfacing, radius blending and finishing in a rigid setup.
Ø1–20 mm · 2 · AlCrN
4-Flute Ball Nose End Mill — Hardened Steel
Four flutes for high-feed finishing in hardened tool steel, with an AlTiN coating that survives the heat.
Ø3–16 mm · 4 · AlTiN
Tapered Ball Nose End Mill — Mold Finishing
A half-degree taper lets one tool finish drafts, fillets and deep ribs that would otherwise need three setups.
Ø1–8 mm, taper 0.5°–3° · 2 · AlCrN
Ball Nose End Mill — Deep Cavity, 4-Flute
Neck relief and a four-flute core for cavities deeper than three diameters, where chip evacuation and stiffness both matter.
Ø2–12 mm · 4 · AlTiN
5-Flute Variable Helix Square End Mill — Stainless
Variable helix and unequal flute spacing break the harmonics that make stainless steel ring. Quieter, and noticeably longer tool life.
Ø6–20 mm · 5 · AlTiN
4-Flute Corner Radius End Mill — Variable Helix
A radius at the corner makes the edge last. Variable helix keeps it quiet. The tool most shops settle on…
Ø3–20 mm, R0.2–3.0 · 4 · AlCrN
4-Flute Corner Radius End Mill — R0.5
A fixed 0.5 mm radius corner, ground to ±0.01 mm, for production work where the radius is specified on the…
Ø6–16 mm, R0.5 · 4 · AlCrN
3-Flute Corner Radius End Mill — Aluminium
High-helix three-flute geometry with a radiused corner for aluminium, where chip clearance decides the finish.
Ø6–16 mm, R0.5–2.0 · 3 · Uncoated / polished
6-Flute Corner Radius End Mill — High-Feed
Six flutes, a generous radius and a strong core for high-feed roughing strategies where the machine can take it.
Ø8–20 mm, R1.0–3.0 · 6 · AlTiN
Corner Radius End Mill — Hardened Steel 60 HRC
For the top of the hardness range: an ultra-fine substrate and AlTiN coating that keep cutting where standard grades stop.
Ø4–16 mm, R0.3–2.0 · 4 · AlTiN
Can't find the geometry you need?
Most of what we ship is ground to a drawing. Send yours — we quote within 24 hours.