Solid carbide cutting tools

Eight product families covering milling, drilling, reaming and deburring — with custom geometry ground to your drawing.

Ground carbide down to Ø0.2 mm for features a standard tool cannot reach, with runout held tight enough to matter.

Ø0.2–3 mm · 2–4 · AlCrN / DLC

Micro ball geometry for small 3D surfaces, radii and ribs where the finish has to come off the tool, not…

Ø0.3–3 mm · 2 · AlCrN / DLC

The micro tool that stops chipping: a small radius on a small edge makes a disproportionate difference to tool life.

Ø0.5–3 mm, R0.05–0.3 · 3–4 · AlCrN

Long neck, short flute: reach into deep ribs without grinding away the rigidity that keeps the tool alive.

Ø0.5–3 mm · 2–4 · AlCrN

Diamond-like carbon on a micro edge: the coating that stops aluminium sticking where you cannot afford to stop and clean…

Ø0.3–3 mm · 2 · DLC

Polished three-flute geometry with a high helix, built for aluminium and non-ferrous work at high spindle speeds.

Ø3–16 mm · 3 · Uncoated / polished

Five diameters deep with coolant straight to the tip. The drill that makes deep holes routine in steel and stainless.

Ø3–20 mm · 2 (140° point) · TiAlN

Eight diameters, internal coolant and a strengthened web: for the holes that normally need a gun drill and a second…

Ø3–16 mm · 2 (140° point) · TiAlN

Polished flutes and a wide helix for aluminium: chips leave fast, and the hole comes out on size.

Ø2–16 mm · 2–3 (130° point) · Uncoated / polished, DLC option

Micro drilling without the breakages: tight runout, a reinforced web and a point geometry that starts where you mark it.

Ø0.5–3 mm · 2 (130° point) · AlCrN

Six flutes and a ground H7 tolerance for holes that have to come out on size and stay there.

Ø3–20 mm (H7) · 6 · TiAlN / uncoated

Straight-flute H7 reaming for through holes, at a price that makes sense for general production.

Ø3–20 mm (H7) · 6 · Uncoated / TiAlN

Can't find the geometry you need?

Most of what we ship is ground to a drawing. Send yours — we quote within 24 hours.