Solid carbide cutting tools

Eight product families covering milling, drilling, reaming and deburring — with custom geometry ground to your drawing.

Spiral flutes push the chip ahead of the cut, so a blind hole does not get scored on the way…

Ø3–20 mm (H7) · 6 · TiAlN

A general-purpose H8 reamer for hole finishing where the fit is less critical than the surface.

Ø4–20 mm (H8) · 6 · Uncoated

Coolant delivered at the cutting zone for reaming deep bores where heat and chips would otherwise distort the hole.

Ø6–25 mm (H7) · 6 · TiAlN

The general-purpose workhorse. Four flutes, a 38° helix and an AlCrN coating that holds up in dry and minimum-lubrication machining…

Ø1–20 mm · 4 · AlCrN

The standard double-cut burr for deburring, weld dressing and stock removal on steel and stainless.

Ø3–16 mm · Double cut (cross cut) · Uncoated / AlTiN option

A single-flute alu-cut geometry that clears soft chips without loading up the teeth.

Ø3–12 mm · Single (alu cut) · Uncoated / polished

A ball burr for radii, blending and internal contours where a cylinder cannot follow the shape.

Ø3–16 mm (ball) · Double cut · Uncoated / AlTiN option

Tree shape with a radiused end for slotting and opening out holes without a sharp corner digging in.

Ø6–16 mm (head) · Double cut · Uncoated / AlTiN option

Ten shapes in a single case: the burr you need without ordering the burr you need.

Ø3–12 mm, 10 shapes · Double cut · Uncoated

Send a drawing or a sample. We grind the profile, the coating and the marking you specify — and quote…

Ø0.2–25 mm · As specified · AlCrN / AlTiN / TiAlN / DLC / uncoated

A profile ground into the flute form: one pass where a standard tool would need three operations.

Ø3–20 mm · 2–6, as specified · AlCrN / AlTiN

Two or more diameters on one body, held concentric so the step lands where the drawing says it does.

Ø1–20 mm, multi-step · 2–4, as specified · TiAlN / AlCrN

Can't find the geometry you need?

Most of what we ship is ground to a drawing. Send yours — we quote within 24 hours.