Solutions by industry

Start from the material, the machine and the operation — not from page one of a catalog. Each route pairs a recommended tool geometry with starting cutting data.

25 entries Ask about a specific tool

General Engineering

Reliable, predictable tooling for job shops working across mixed materials and short runs, where the next job is never quite the same as the…

Chucking Reamer — Carbide, H8

A general-purpose H8 reamer for hole finishing where the fit is less critical than the surface.

Reamer — Through-Hole, Internal Coolant

Coolant delivered at the cutting zone for reaming deep bores where heat and chips would otherwise distort the hole.

Carbide Burr — Aluminium Cut, Single Flute

A single-flute alu-cut geometry that clears soft chips without loading up the teeth.

Carbide Burr — Ball Shape, Double Cut

A ball burr for radii, blending and internal contours where a cylinder cannot follow the shape.

Carbide Burr — Tree Shape, Radius End

Tree shape with a radiused end for slotting and opening out holes without a sharp corner digging in.

Carbide Burr Set — 10-Piece Workshop Kit

Ten shapes in a single case: the burr you need without ordering the burr you need.

Custom Profile End Mill — From Drawing

A profile ground into the flute form: one pass where a standard tool would need three operations.

Custom Step Drill — Carbide

Two or more diameters on one body, held concentric so the step lands where the drawing says it does.

Custom Form Tool — Multi-Profile

Several profiles on one body: the answer when a family of parts shares a common set of shapes.

Can't find the geometry you need?

Most of what we ship is ground to a drawing. Send yours — we quote within 24 hours.

Request a Quote Made to drawing